Use a filled, honed travertine top over a 560–600 mm (22–24 in) deep base, with the rim at 800–900 mm (31–35 in) above the floor for many adult users. Support the 20 mm (0.79 in) stone continuously around the sink cutout; avoid unfilled travertine where soap and water collect.
Which travertine measurements determine whether a vanity fits?
The measurements that control fit are rim height, depth, sink cutout and support; stone color resolves none of them.
| Item | Working specification | Condition |
|---|---|---|
| Finished rim height | 800–900 mm (31–35 in) | Set after selecting basin and mirror |
| Finished depth | 560–600 mm (22–24 in) | Check bowl, tap reach and circulation |
| Stone skin | 20–30 mm (0.79–1.18 in) | Continuous substrate remains required |
| Top weight example | 33.0–35.6 kg (72.8–78.6 lb) | 1,200 × 550 × 20 mm (47.2 × 21.7 × 0.79 in) top using 2.5–2.7 t/m³ (156–169 lb/ft³) travertine density |
Which vanity plans deserve the first drawing?
Begin with storage and basin arrangement. The collection grid uses category and stone filters; our current collection organizes these as design routes rather than fixed vanity models.
Freestanding rectangular vanity
A freestanding vanity allows deep drawers and a toe recess at a 560–600 mm (22–24 in) depth. Coordinate its exposed-end overhang and substrate.
Wall-hung stone-clad vanity
A wall-hung plan needs a concealed frame and wall substrate that carry the whole assembly. Approve the face before locating drawer boxes.
Console and vessel-basin vanity
A console exposes plumbing and suits a shallower cabinet. A vessel bowl raises rim and tap positions, so set height after bowl selection.
More stone stone vanities in selected finishes
Is travertine a sensible bathroom vanity stone?
Travertine is sensible when filled, sealed for the use and supported around the basin, but it is not maintenance-free. Risks are etching, soil in voids, edge chips and failed joints.
| Bathroom condition | Travertine response | Design decision |
|---|---|---|
| Daily soap film | Honed, filled stone is forgiving | Use pH-neutral stone soap |
| Cosmetics and descaler | Carbonate stone may etch | Rinse acids immediately |
| Open voids | Unfilled stone traps residue | Specify filled stone for a wet zone |
Which travertine color belongs with the rest of the bathroom?
Match the travertine ground tone to fixed finishes. Beige adapts to timber and brass; silver is cooler; red needs a deliberate palette; white needs controlled light.
| Travertine | Color role | Strong pairing | Check on the sample |
|---|---|---|---|
| Beige travertine | Warm neutral | Oak and aged brass | Yellow, pink or gray cast beside the wall |
| Silver travertine | Cool gray | Gray cabinetry and nickel | Directional streaks across the sink front |
| Red travertine | Earth-red | Dark timber and bronze | Whether color overwhelms a small room |
| White travertine | Pale texture | White plumbing and oak | Soap residue under bathroom lighting |
What commercial details remain unconfirmed?
Only a production quotation can price and schedule a specific vanity. Pricing is available on request through Contact; confirm the four items below when you enquire.
| Commercial item | Status for this collection |
|---|---|
| Minimum order | 1 piece |
| Production and shipping | About 20 days production + about 30 days shipping; production starts after deposit receipt and drawing confirmation |
| Price | vanity quote on request through Contact |
| Inventory | Yes, stock is available. Sizes and quantities are not published. |
How does travertine compare with other bathroom vanity stones?
Travertine offers visible texture but is not the hardest option. Choose by splash pattern, edge detail and visual pattern.
| Stone | Vanity advantage | Bathroom caution | Use when |
|---|---|---|---|
| Travertine | Linear voids | Pits, acid marks, edge chips | Filled, honed wet-zone top |
| Marble | Clear veining | Etching and water rings | Low-splash plan |
| Onyx | Strong translucent pattern | Fissures and water sensitivity | Powder room |
| Quartzite | Dense, quiet surface | Needs tested slab and finish | Hard-wearing plan |
Compare travertine and marble for furniture when the decision turns on etching, pattern and maintenance rather than color alone.
How should a travertine vanity be cleaned without dulling it?
Clean sealed travertine with pH-neutral stone soap and clean water, then dry the rim and wall joint. Rinse acids immediately; carbonate stone can etch.
- Wipe the basin rim and tap base after use.
- Test new cleaners on a hidden offcut.
- Inspect sealant at the wall, sink and upstand regularly.
The Natural Stone Institute’s stone care guidance covers pH-neutral cleaning and spill response.
What else should be settled before approving a travertine vanity?
Settle the basin, sink support, wall fixing and drawer clearance before stone fabrication. These questions cover changes that are costly after cutting.
Does a travertine vanity need a reinforced sink cutout?
Yes. A sink opening interrupts the stone skin, so the remaining rim needs a continuous moisture-resistant substrate detailed by the fabricator. Account for sink type, faucet holes, drawer clearance and filled weight. A 20 mm (0.79 in) slab is not self-supporting across the opening.
Which travertine finish works better in a bathroom?
Filled, honed travertine is a lower-maintenance start because pits are closed and low sheen softens marks. Polished stone is possible, but soap film and etching show more. Approve a sample, not only a color name. Approve it in room light.
How deep should a travertine vanity be?
A 560–600 mm (22–24 in) depth is a planning range after checking basin, tap reach and circulation. Shallow consoles suit smaller bowls; deep drawers reduce knee space. Measure opening and plumbing before cutting. Include tap and splash depth.
Can a wall-hung travertine vanity support a vessel sink?
It can be approved only after checking wall structure, frame and fixings for combined load. Stone, basin, water and fittings contribute. A vessel bowl raises the rim, so choose it before setting 800–900 mm (31–35 in) height. Verify the assembled load.
Where should I go next in the vanity and stone library?
Use the parent guide for other vanity stones, then follow travertine processing and care routes.
Project inquiry
Request a stone furniture quote
Send dimensions, material direction and quantity for a comparable reply.
Useful details include product type, finished dimensions, quantity and destination.
Which facts were used for this travertine vanity page?
This page uses calculated weight, planning dimensions and public material guidance. The approved size and stone lot control the finished vanity.