This travertine fireplace design uses an Art Deco stepped silhouette with no carved ornament and a honed finish. Integrated legs keep the lower frame continuous, while the stepped mantel creates decoration through geometry rather than surface carving. The living-room view shows a low surround with no overmantel or visible hearth.
Honed travertine gives the stepped planes a restrained surface that does not compete with the architecture. The layered profile becomes the main detail, so alignment at each step and continuity of the stone grain matter when the surround is assembled. Travertine should be filled and sealed for easier maintenance, with a finish approved on a sample. This design can use another suitable natural stone and be proportioned for the wall and firebox. The installer should verify the required firebox separation and all local fixing and heat-protection rules.
For a quote, photograph the room and share the fireplace opening dimensions and wall width. We reply within 24 hours. Production is about 20 days after the deposit and drawing approval, followed by roughly 30 days of logistics. Start with the fireplace collection, explore Art Deco Fireplaces, review fireplace project views, or contact the stone team.
Photo references
Explore the stone details
Open any image, add your project details, and continue to the inquiry form.
